How to use

Standard preparation of the nail plate

1. Buff the nail.

2. Degrease the nail with Nano Dehydrator Nail Prep.

3. Apply Ultrabond non-acid primer.

4. Apply the first layer of elastic base: F.O.X Base Rubber or F.O.X Base Power.

5. Cure in a 36W UV lamp for 2 minutes, UV36/48W LED lamp for 60 seconds.

6. Apply the F.O.X Shine Gel Aurora all over the nail, if reinforcement and leveling is needed, use the drip method.

7. Cure under a 36W UV lamp - 2 minutes; under a 48W LED/UV lamp - 60-120 sec. (depending on the amount of material).

Remove the sticky layer with a dust-free cotton swab and the F.O.X Cleanser. File

8. Apply any F.O.X color gel or F.O.X Top.

9. Cure in a 36W UV lamp – 2 min., LED/UV lamp 36/48W 60 sec.

Additional recommendations: If the client wants to leave the nails without a color gel coating varnish, after drying the Shine GeI, a top coat should be applied.

If you wish cover with gel varnishes, or make a design, for a better and clean result lines, we recommend removing the dispersion layer first.

Remove with the use of a nail drill or a file.

Ingredients

F.O.X Shine Gel Aurora 003

Name: F.O.X Shine Gel Aurora 003
Brand: F.O.X
SKU: SnG-Au003
Price: 16.5 USD
Availability: InStock

by F.O.X

SKU: SnG-Au003

$16.50

Unit price: per

F.O.X Shine Gel Aurora 003 — liquid gel with a pearl effect for strengthening the natural nail plate.

The gel does not need to be buffed, perfectly evens out and strengthens both short and long nails. It is self-leveling, has a liquid consistency, does not shrink during wear and retains a perfect shine.

For better adhesion of the material to the nail plate, we recommend applying the F.O.X Shine Gel to the nail covered with a thin layer of flexible base coat as a primer.

Advantages: