ELAN Brow & Lash Flexing Expert System «SUPERSONIC 2.0» Serum 2, 10 ml

EYEBROW FLEXING PROCEDURE STEPS

1. Assess the client's eyebrow hairs condition.

Processing times for eyebrow flexing solutions:

• Type 1: thick, natural eyebrows without prior chemical treatments (like tinting or bleaching) — 5–8 minutes for Serum 1 and 6–8 minutes for Serum 2.
• Type 2: medium thickness, natural eyebrows or those with previous treatments — 3–5 minutes for Serum 1 and 6–8 minutes for Serum 2.

Multivitor processing time is 5 minutes for all hair types.

Note: Maximum processing time for Serum 1 and Serum 2 is 15 minutes.
Note: The reaction time of Serum 1 and Serum 2 depends on room temperature; higher temperatures reduce reaction time.

1. Prepare eyebrows for the flexing procedure.

Use ÉLAN Cleansing Detox-Mousse 2.0 to cleanse the hairs and skin. Remove the foam with a water-moistened cotton pad.

1. Shape eyebrows (Serum 1).

Note: For sensitive skin, apply a thin layer of ÉLAN argan oil cream on the eyebrows and a thicker layer around them. Use BLACKWOOD 4 brush.

Apply Serum 1 using BLACKWOOD 3 brush.

Note: Ensure processing time matches the selected hair type.

After processing, remove excess solution with a water-moistened cotton pad.

Note: Shape the eyebrows following the natural hair growth direction to avoid folding.

1. Set eyebrow hair direction (Serum 2).

Note: For sensitive skin, apply ÉLAN argan oil cream as described earlier.

Apply Serum 2 to set the hair direction.

Note: Use the same amount of Serum 2 as Serum 1.
Note: Processing time must match Serum 1 but be no less than 6 minutes.

After processing, remove excess with a water-moistened cotton pad.
If tinting will follow, use Detox-Mousse 2.0 to stop the chemical reaction.

1. Eyebrow care (Multivitor).

Apply Multivitor on the eyebrows.

After 5 minutes, remove excess with a moistened cotton pad.
If tinting will follow, cleanse again with Detox-Mousse 2.0.
Proceed with tinting immediately after.

Note: Expect brighter and faster color results.
Use Colour Fix 2.0 for longer-lasting effect.
Finish with tweezing to shape the brows.

LASH FLEXING PROCEDURE STEPS

1. Analyze the client's eyelash condition.

Processing times for lash flexing:

• Type 1: thick or straight lashes — 6–10 minutes for Serum 1 and no less than 6 minutes for Serum 2.
• Type 2: medium or thin lashes — 3–6 minutes for Serum 1 and no less than 6 minutes for Serum 2.

Multivitor processing time is 5 minutes for all lash types.

Note: Maximum processing time is 15 minutes.
Note: Higher temperatures = shorter reaction times.

1. Prepare lashes.

Cleanse the area with Detox-Mousse 2.0. Remove foam with water.

Attach a suitable silicone pad on the upper eyelid.
Fix lashes to the pad using ÉLAN fixing gel and applicator.

1. Create curl (Serum 1).

Apply Serum 1 with BLACKWOOD 1 brush.

Note: Match time to lash type.

After processing, remove excess with dry BLACKWOOD 2 brush in the direction of hair growth.

1. Set direction (Serum 2).

Apply a thick layer of Serum 2.

Note: Use the same amount as Serum 1.
Note: Processing time must match Serum 1 but not be less than 6 minutes.

Remove excess with BLACKWOOD 2 brush in lash growth direction.

1. Lash care (Multivitor).

Apply Multivitor and wait 5 minutes.

Remove Multivitor and fixing gel with a moistened cotton pad.

Note: For stunning results, tint lashes after flexing using ÉLAN Gel Tint 01 Black.
Use Detox-Mousse 2.0 to stop the chemical process.
Follow with Colour Fix 2.0.

POST-PROCEDURE RECOMMENDATIONS

• Do not use henna or bleach on eyebrows post-procedure.
• Avoid saunas, tanning beds, and sleeping face down for 24 hours.
• Avoid water contact and brushing for 24 hours.
• For 48 hours, avoid aggressive products (scrubs, peels, alcohol-based lotions) and treatments like laser.