1. Nail Preparation:
1.1 Apply F.O.X Nail Prep to the prepared nail to remove oils and moisture.
1.2 Use F.O.X Ultrabond – an acid-free primer for extra adhesion.
2. Base Layer:
2.1 It’s recommended to apply an elastic base (such as F.O.X Power Base) for better adhesion and strength. Apply evenly across the nail, ensuring coverage along the sidewalls.
2.2 Cure in a 36W UV lamp for 1 minute or in a 36/48W LED/UV lamp for 30 seconds.
3. Nail Repair Using F.O.X Jelly Gel:
3.1 For repairing broken corners or damaged areas, apply a small amount of Jelly Gel directly to the affected area.
3.2 Use a fine brush or spatula to carefully shape and build the missing corners or fill in the broken sections, ensuring the gel is applied evenly.
3.3 Cure in a 36W UV lamp for 2-3 minutes or in a 36/48W LED/UV lamp for 2-4 minutes.
3.4 Repeat if necessary to build the nail to the desired shape and strength.
4. Nail Repair or Extension Using Paper Forms:
4.1 Position the lower paper form securely under the free edge of the nail.
4.2 Apply a thin first layer of F.O.X Jelly Gel to the natural nail and extend it onto the paper form to begin building the length and shape.
4.3 Cure in a 36W UV lamp for 2-3 minutes or in a 36/48W LED/UV lamp for 2-4 minutes.
4.4 Apply additional layers of F.O.X Jelly Gel, curing each layer after application until the desired length and shape are achieved.
4.5 Remove the paper form and file the nail to the desired shape.
5. Nail Extension Using Dual Forms:
5.1 Select the appropriate dual form size for each nail.
5.2 Fill the dual form with F.O.X Jelly Gel, ensuring an even layer.
5.3 Gently press the dual form onto the natural nail, removing any excess gel around the edges.
5.4 Cure in a 36W UV lamp for 2-3 minutes or in a 36/48W LED/UV lamp for 2-4 minutes.
5.5 Carefully remove the dual form, leaving the hardened gel structure on the nail.
5.6 File and shape the nail to your desired finish.
6. Final Shaping and Finishing:
6.1 Use a hand file or nail drill to shape and refine the nail.
6.2 The nail is now ready for gel polish or topcoat application.
Removal:
* To remove, file off the gel using a hand file or nail drill.
Acrylates Copolymer, Hydroxypropyl Methacrylate, Cellulose Acetate Butyrate, Dimethicone, Microcrystalline Wax, Mica, CI 77491, CI 77492, Zinc sulphide, CI 77007, CI 77266, Hydroxycyclohexyl Phenyl Ketone
HEMA free. Non-soak-off.
Jelly is a gel with a jelly-like consistency. It has the appropriate viscosity and perfectly holds a complex shape before curing, which allows you to easily adjust the shape of the nail. During modeling, it remains stationary, which makes it possible to work with several nails at the same time. Not self-leveling.
The Set Includes: Jelly Capuccino, Jelly Clear, Jelly Milk, Jelly Cover Pink, Jelly Natural
- 15 ml each / 0.5 fl. oz each
- Stiffness of the material
- The gel perfectly holds the nail arch
- Does not burn in a lamp
- The master can choose the consistency and shade of the gel from 12 options
- Builder and Hard gels are self-leveling
- Jelly gel perfectly holds a complex shape before polymerization
- Cover gel in medium and jelly-like consistency preserves the smile line
FREE shipping on orders over $100
Shipping from United States warehouse by USPS or UPS
Delivery time 1-4 business days
Adding product to your cart
You may also like
1. Nail Preparation:
1.1 Apply F.O.X Nail Prep to the prepared nail to remove oils and moisture.
1.2 Use F.O.X Ultrabond – an acid-free primer for extra adhesion.
2. Base Layer:
2.1 It’s recommended to apply an elastic base (such as F.O.X Power Base) for better adhesion and strength. Apply evenly across the nail, ensuring coverage along the sidewalls.
2.2 Cure in a 36W UV lamp for 1 minute or in a 36/48W LED/UV lamp for 30 seconds.
3. Nail Repair Using F.O.X Jelly Gel:
3.1 For repairing broken corners or damaged areas, apply a small amount of Jelly Gel directly to the affected area.
3.2 Use a fine brush or spatula to carefully shape and build the missing corners or fill in the broken sections, ensuring the gel is applied evenly.
3.3 Cure in a 36W UV lamp for 2-3 minutes or in a 36/48W LED/UV lamp for 2-4 minutes.
3.4 Repeat if necessary to build the nail to the desired shape and strength.
4. Nail Repair or Extension Using Paper Forms:
4.1 Position the lower paper form securely under the free edge of the nail.
4.2 Apply a thin first layer of F.O.X Jelly Gel to the natural nail and extend it onto the paper form to begin building the length and shape.
4.3 Cure in a 36W UV lamp for 2-3 minutes or in a 36/48W LED/UV lamp for 2-4 minutes.
4.4 Apply additional layers of F.O.X Jelly Gel, curing each layer after application until the desired length and shape are achieved.
4.5 Remove the paper form and file the nail to the desired shape.
5. Nail Extension Using Dual Forms:
5.1 Select the appropriate dual form size for each nail.
5.2 Fill the dual form with F.O.X Jelly Gel, ensuring an even layer.
5.3 Gently press the dual form onto the natural nail, removing any excess gel around the edges.
5.4 Cure in a 36W UV lamp for 2-3 minutes or in a 36/48W LED/UV lamp for 2-4 minutes.
5.5 Carefully remove the dual form, leaving the hardened gel structure on the nail.
5.6 File and shape the nail to your desired finish.
6. Final Shaping and Finishing:
6.1 Use a hand file or nail drill to shape and refine the nail.
6.2 The nail is now ready for gel polish or topcoat application.
Removal:
* To remove, file off the gel using a hand file or nail drill.
Acrylates Copolymer, Hydroxypropyl Methacrylate, Cellulose Acetate Butyrate, Dimethicone, Microcrystalline Wax, Mica, CI 77491, CI 77492, Zinc sulphide, CI 77007, CI 77266, Hydroxycyclohexyl Phenyl Ketone
You may also like
You may also like
Me encanto es súper fuerte para usarlo con moldes es el perfecto , súper agradecida y complacida con la compra