EYEBROW FLEXING PROCEDURE STEPS

1. Assess the client's eyebrow hairs condition.

Processing times for eyebrow flexing solutions:

• Type 1: thick, natural eyebrows without prior chemical treatments (tinting, bleaching) – 5–8 min (Serum 1) and 6–8 min (Serum 2)
• Type 2: medium thickness, natural eyebrows or previously treated – 3–5 min (Serum 1) and 6–8 min (Serum 2)

Multivitor processing time: 5 minutes for all types.

NOTE! Max time for Serum 1 and Serum 2 is 15 minutes. Reaction time varies by room temperature — higher temps shorten it.

1. Prepare eyebrows for the procedure.

Clean hairs and skin using ÉLAN Cleansing Detox-Mousse 2.0. Remove foam with a cotton pad moistened with water.

1. Shape eyebrows with Serum 1.

For sensitive skin, apply ÉLAN argan oil cream in a thin layer on brows and a thicker one around them. Use BLACKWOOD 4 brush.

Apply Serum 1 with BLACKWOOD 3 brush, following selected hair type processing time. Remove excess with a water-moistened pad. Shape brows in the direction of hair growth to prevent folding.

1. Set hair direction with Serum 2.

Repeat cream application if needed. Use equal amount of Serum 2 as Serum 1. Minimum time: 6 minutes. Afterward, remove excess with a water-moistened pad.

If you plan to tint brows, stop the reaction with Detox-Mousse 2.0. Remove foam with a water-moistened pad.

1. Eyebrow care with Multivitor.

Apply Multivitor and leave for 5 minutes. Remove with a moistened pad.

Before tinting, cleanse again with Detox-Mousse 2.0. Tint color will appear faster and brighter.

Use ÉLAN Colour Fix 2.0 for long-lasting results. Shape eyebrows after tinting. Use tweezers, not wax, to avoid skin damage.

LASH FLEXING PROCEDURE STEPS

1. Analyze client's lashes.

Processing times:

• Type 1: thick/straight – 6–10 min (Serum 1), min. 6 min (Serum 2)
• Type 2: medium/thin – 3–6 min (Serum 1), min. 6 min (Serum 2)

Multivitor: 5 minutes. Max for Serums: 15 minutes. Room temp affects processing.

1. Prepare lashes.

Clean with Detox-Mousse 2.0. Wipe with moistened pad. Attach silicone pad to upper eyelid.

Fix lashes on the pad using ÉLAN fixing gel and applicator.

1. Curl lashes with Serum 1.

Apply to curled part using BLACKWOOD 1 brush. Process according to hair type.

Remove excess with dry BLACKWOOD 2 brush, moving along lash growth.

1. Set direction with Serum 2.

Apply thick layer evenly. Use same amount as Serum 1. Leave for at least 6 minutes or match Serum 1 time. Remove with dry BLACKWOOD 2 brush.

1. Lash care with Multivitor.

Apply and leave for 5 minutes. Remove excess and gel with moistened pad.

Tint with ÉLAN 01 Black Gel for best results. Stop the chemical reaction with Detox-Mousse 2.0. Clean with moistened pad.

Use Colour Fix 2.0 to enhance and set results.

POST-PROCEDURE RECOMMENDATIONS

• Avoid henna tinting or bleaching — results may be unpredictable (dryness, dull color, fragility, hair loss)
• No sauna, solarium, or sleeping face-down for 24 hrs after procedure
• Avoid water, brushing, and aggressive treatments (scrubs, peels, alcohol-based products, laser) for 48 hrs after