The Microstop Maxi is a professional-grade high-temperature dry heat sterilizer designed for large beauty salons, nail studios. It offers both horizontal and vertical loading, making it versatile and ideal for high-volume sterilization.
Key Features:
- Capacity: Holds up to 6 sets of tools or 9 sterilization pouches, making it perfect for larger establishments with higher tool turnover.
- Dual Loading Design: Supports both horizontal and vertical loading, allowing for flexible placement and efficient sterilization.
-
Sterilization Modes:
- 200°C for 30 minutes
- 180°C for 60 minutes
- 160°C for 150 minutes
- Drying Mode: Operates at 80°C for 30 minutes, ensuring instruments are completely dry and ready for immediate use.
The Microstop Maxi is specifically created to handle the demands of big beauty salons and studios that require the sterilization of a large number of tools simultaneously. Its compact yet spacious design and ease of use make it a top choice for busy professionals.
Easy Operation & Advanced Control:
- Automatic Control: With one-button operation, the sterilizer is user-friendly, even for non-technical users.
- Electronic Function Control: Equipped with a light display showing temperature and time indicators on the front panel, making it easy to monitor the sterilization process.
Technical Characteristics:
- Dimensions: 15.16 x 14.09 x 9.53 inches (385 x 358 x 242 mm), compact yet highly efficient.
- Voltage: Redesigned for USA market.
- Durability: The dry heat method does not blunt tools, ensuring they remain sharp and effective after repeated sterilization cycles.
Warranty & Extended Protection:
- 12-Month Manufacturer’s Warranty: Comes with a standard 12-month warranty, ensuring durability and performance.
- Extended Warranty Available: Option to extend the warranty for additional peace of mind and long-term protection.
Why Choose the Microstop Maxi?
This sterilizer offers high productivity, with a longer service life due to its ability to handle large volumes of tools. Its appealing design, easy controls, and efficiency make it the perfect addition to any professional setting looking for safe, high-capacity sterilization.
The Microstop Maxi is a professional-grade high-temperature dry heat sterilizer designed for large beauty salons, nail studios. It offers both horizontal and vertical loading, making it versatile and ideal for high-volume sterilization.
Key Features:
- Capacity: Holds up to 6 sets of tools or 9 sterilization pouches, making it perfect for larger establishments with higher tool turnover.
- Dual Loading Design: Supports both horizontal and vertical loading, allowing for flexible placement and efficient sterilization.
-
Sterilization Modes:
- 200°C for 30 minutes
- 180°C for 60 minutes
- 160°C for 150 minutes
- Drying Mode: Operates at 80°C for 30 minutes, ensuring instruments are completely dry and ready for immediate use.
The Microstop Maxi is specifically created to handle the demands of big beauty salons and studios that require the sterilization of a large number of tools simultaneously. Its compact yet spacious design and ease of use make it a top choice for busy professionals.
Easy Operation & Advanced Control:
- Automatic Control: With one-button operation, the sterilizer is user-friendly, even for non-technical users.
- Electronic Function Control: Equipped with a light display showing temperature and time indicators on the front panel, making it easy to monitor the sterilization process.
Technical Characteristics:
- Dimensions: 15.16 x 14.09 x 9.53 inches (385 x 358 x 242 mm), compact yet highly efficient.
- Voltage: Redesigned for USA market.
- Durability: The dry heat method does not blunt tools, ensuring they remain sharp and effective after repeated sterilization cycles.
Warranty & Extended Protection:
- 12-Month Manufacturer’s Warranty: Comes with a standard 12-month warranty, ensuring durability and performance.
- Extended Warranty Available: Option to extend the warranty for additional peace of mind and long-term protection.
Why Choose the Microstop Maxi?
This sterilizer offers high productivity, with a longer service life due to its ability to handle large volumes of tools. Its appealing design, easy controls, and efficiency make it the perfect addition to any professional setting looking for safe, high-capacity sterilization.
How to properly sterilize manicure tools in a dry heat sterilizer?
The sterilization process in a dry heat sterilizer is as follows: place the tools, which have been pre-cleaned and dried, on the removable tray. Lower the tray into the sterilization chamber, close the sterilizer lid, set the sterilization time and mode using the buttons, wait for the timer to go off, and then wait for the sterilizer to cool down a bit.
How to turn on a dry heat sterilizer?
- Plug the sterilizer into the power source.
- Press the button on the back panel.
- On the front panel, press the button and use short presses to select the desired mode (note: for sterilizing in craft pouches, choose a mode no higher than 180°C).
- After selecting the mode, hold the button for a few seconds to start the chosen cycle.
Please note: The button on the front panel is not touch-sensitive— it must be pressed.
How to properly sterilize tools?
1. Soak the tools in a disinfecting solution, prepared according to the manufacturer's instructions.
2. Thoroughly rinse the tools under running water.
3. Dry the tools. Remove any water droplets (e.g., with a paper towel). Place the tools on the dry heat sterilizer tray and set it to the "drying" mode at 80°C for 30 minutes. Alternatively, you can wait for the tools to dry completely without using the "drying" mode.
4. Place the dried tools into craft pouches or on the dry heat sterilizer tray.
5. Select the sterilization mode.
6. After the sterilization cycle is complete and the signal sounds, open the sterilizer. Wait for it to cool down to 20-30°C, turn off the button on the back panel, and unplug the sterilizer.
What is the difference between a dry heat sterilizer and an autoclave?
Air sterilizers (dry heat sterilizers) use hot, dry air for sterilization. Pathogens are destroyed by high temperatures (starting at 160°C) and extended exposure time.
Steam sterilizers (autoclaves) use hot steam under pressure. In this case, pathogens are destroyed at lower temperatures, typically between 126°C and 135°C.
Is it okay to overload the dry heat sterilizer and stack pouches on top of each other?
Overloading the dry heat sterilizer can interfere with the circulation of hot air inside the chamber, which may not only prevent proper sterilization of the tools but also cause overheating and potential damage to the device.
That's why we recommend arranging the tools in a way that doesn't block the ventilation openings by more than 70%.
Is it normal for a residue to form in a dry heat sterilizer?
A smell or residue during sterilization is a normal occurrence when using craft paper pouches, as the paper contains resins. When heated, these resins are released and can settle on the surfaces of the dry heat sterilizer over time. However, if you clean your sterilizer regularly, the residue will not accumulate.