Standard preparation of the nail plate
1. Buff the nail
2. Degrease the nail with Nano Dehydrator Nail Prep
3. Apply Ultrabond non-acid primer
4. Apply the first layer of any F.O.X Base coat.
5. Cure in a 36W UV lamp for 2 minutes, UV36/48W LED lamp for 60 seconds.
6. Using a spatula or an orange stick, take the required amount of Poly Gel Beverly and apply it to the nail.
7. Wet the brush for Poly Gel Beverly No. 12, remove the excess and distribute the material on the nail plate. Use brush movements to build the nail architecture to perfect smoothness.
8. Polymerize in a 36W UV lamp for 2-3 minutes.
9. Remove the dispersion layer.
The nail is ready to apply gel polish or top.
Remove with the use of a nail drill or a file.
Acrylates Copolymer, Hydroxypropyl Methacrylate, Polymethyl Methacrylate, Cellulose Acetate Butyrate, Dimethicone, Microcrystalline Wax, Zinc sulphide, CI 77492, CI 77491, CI 77266, CI 15850, CI 73360, CI 77007, Hydroxycyclohexyl Phenyl Ketone
HEMA free
F.O.X Acrygel Beverly 003 is a universal camouflage material with shimmering particles, designed to model, correct and strengthen the nail plate.
The product combines the best properties of acrylic and gel. When applied to the nail plate, it does not spread, it is easily distributed over the surface using a brush. Its consistency allows you to build up a short length without setting forms and gives the opportunity to model on upper and lower forms.
Has a minimal sticky layer, does not cause a burning sensation of the nail plate during curing. To strengthen adhesion, a substrate of any base is required.
Acrygel does not cause allergies and has no smell. The material is presented in four shades.
Features
- Easy to teach;
- Does not spread;
- Has no smell;
- Cure only in a lamp, does not burn.
FREE shipping on orders over $100
Shipping from United States warehouse by USPS or UPS
Delivery time 1-4 business days
Adding product to your cart
You may also like
Standard preparation of the nail plate
1. Buff the nail
2. Degrease the nail with Nano Dehydrator Nail Prep
3. Apply Ultrabond non-acid primer
4. Apply the first layer of any F.O.X Base coat.
5. Cure in a 36W UV lamp for 2 minutes, UV36/48W LED lamp for 60 seconds.
6. Using a spatula or an orange stick, take the required amount of Poly Gel Beverly and apply it to the nail.
7. Wet the brush for Poly Gel Beverly No. 12, remove the excess and distribute the material on the nail plate. Use brush movements to build the nail architecture to perfect smoothness.
8. Polymerize in a 36W UV lamp for 2-3 minutes.
9. Remove the dispersion layer.
The nail is ready to apply gel polish or top.
Remove with the use of a nail drill or a file.
Acrylates Copolymer, Hydroxypropyl Methacrylate, Polymethyl Methacrylate, Cellulose Acetate Butyrate, Dimethicone, Microcrystalline Wax, Zinc sulphide, CI 77492, CI 77491, CI 77266, CI 15850, CI 73360, CI 77007, Hydroxycyclohexyl Phenyl Ketone
You may also like
You may also like
Thank 😊
I was wondering if it’s like on picture and I was very excited try and result is more then likely positive….I love it so much and work with this poly gels is very easy
