How to use

Standard preparation of the nail plate

1. Buff the nail

2. Degrease the nail with F.O.X Nano Dehydrator Nail Prep

3. Apply F.O.X Ultrabond non-acid primer

4. Cover the entire nail surface with a thin layer of a flexible F.O.X base coat and cure.

5. Apply a small amount of Acryl Gel Bottle Tussah and spread it evenly over the nail for a smooth finish.
Cure under a 36W UV lamp - 2-3 minutes; under a 48W LED/UV lamp - 60-120 sec.

6. Be sure to remove the dispersion layer before applying gel polish or top coat. Use a lint-free wipe and F.O.X Cleanser.
Then file as needed.

The nail is ready to be painted with the gel polish or top coat of your choice.

Remove with the use of a nail drill or a file.

Pro Tips: Keep gel jars clean by cutting a small opening in the foil instead of peeling it off — it prevents leaks and accidental curing. Bonus: use the foil edge to wipe off excess product for mess-free application!

Ingredients

Save $10.03

F.O.X Tussah Power Strength Acryl Gel Bottle Kit – Set of 5

~~$66.90~~ $56.87 Save 15%

Unit price: per

The Tussah Kit Includes:

F.O.X Nail Prep (Nail Dehydrator), 14 ml
F.O.X Ultrabond non-acid primer, 14 ml
F.O.X Power Base, 14 ml
F.O.X Tussah Acrylgel, 15 ml
F.O.X Nail Art Brush 004 "Round"

F.O.X Acryl Gel Bottle Tussah is an acrylic gel infused with Tussah silk fibers. This product is both strong and flexible due to the fibers it contains. They provide reinforcement for natural nails and help prevent breakage while maintaining flexibility, making it ideal for strengthening natural nails of any length.

HOW TO USE:

Standard preparation of the nail plate

1. Buff the nail

2. Degrease the nail with F.O.X Nano Dehydrator Nail Prep

3. Apply F.O.X Ultrabond non-acid primer:

Open the bottle and remove any excess liquid from the brush by wiping it on the edge of the bottle or by using a lint-free wipe if necessary.
Apply the product in stripes, evenly from the cuticle to the free edge. Make sure not to apply too much product, but ensure that the entire nail is fully covered.
Avoid getting the product on the sidewalls of the nails.
After applying, allow the coating to dry completely (30 seconds). Only after that, you can apply the base coat.

4. Cover the entire nail surface with a thin layer of a flexible F.O.X Power Base and cure in a UV lamp (36W) for 2 minutes, LED/UV lamp (36/48W) for 60 seconds.

5. Apply a small amount of Acryl Gel Bottle Tussah and spread it evenly over the nail for a smooth finish.
Cure under a 36W UV lamp - 2-3 minutes; under a 48W LED/UV lamp - 60-120 sec.

6. Be sure to remove the dispersion layer before applying gel polish or top coat. Use a lint-free wipe and F.O.X Cleanser.
Then file as needed.

The nail is ready to be painted with the gel polish or top coat of your choice.

Remove with the use of a nail drill or a file.